The crimper P-Die cross reference charts provided on this page have been compiled from various sources including published material from Burndy & Huskie Tools. For further information regarding dies produced by specific manufacturers, please refer to the footnotes at the bottom of this page. All listed 15-ton dies are the P-type die sets and may be used in tools from any other manufacturer.

 

Jump Bar:

 [Top of Page] | U-Die: [Copper] [Aluminum] [Specialty] | P-Die: [Copper] [Aluminum] [Specialty] | [Footnotes]

 

Crimper P-Die Cross Reference, 15 Ton, Copper

Wire Size

Color

Burndy

Huskie Tools

           

750 MCM

Black

P39RT

HT641BP

           
1000 MCM

Orange

P40RT

HT61BR

           
1500 MCM White P44RT HT61BU            
  Yellow P45RT              
2000 MCM

Green

P46RT

HT61BV

           

 

Jump Bar:

  [Top of Page] | U-Die: [Copper] [Aluminum] [Specialty] | P-Die: [Copper] [Aluminum] [Specialty] | [Footnotes]

 

Crimper P-Die Cross Reference, 15 Ton,  Aluminum

Wire Size

Color

Burndy

Huskie Tools

           

750 MCM

Red

P39ART 

HT61FC

           
1000 MCM

Gold

P40ART

HT61HJ

           
1500 MCM

Brown

P44ART

HT61FD

           
2000 MCM

Yellow

PKR

HT61AC

           

 

Jump Bar:

  [Top of Page] | U-Die: [Copper] [Aluminum] [Specialty] | P-Die: [Copper] [Aluminum] [Specialty] | [Footnotes]

 

Crimper P-Die Cross Reference, 15 Ton, C-Tap, H-Tap & Other Specialty Dies

Wire Run

Wire Tap

Burndy

Huskie Tools

Ilsco

Blackburn

Panduit

   

PKR

HT61BV

 

 

 

   

PN

HT61AJ

   

 

   

PYFR

 

 

 

 

   

PYFN

 

 

 

 

   

P254

 

 

 

 

   

P292

 

 

 

 

   

P293

 

 

 

 

   

P319

 

 

 

 

   

P320

 

 

 

 

   

P342

 

 

 

 

   

P352

 

 

 

 

   

P419

 

 

 

 

   

P469

 

 

 

 

   

P579

 

 

 

 

   

P654

 

 

 

 

   

P717

 

 

 

 

   

P719

 

 

 

 

   

P720

 

 

 

 

   

P722

 

 

 

 

   

P724

HT61KX

 

 

 

   

P725

 

 

 

 

   

P998

 

 

 

 

   

P999

 

 

 

 

   

P1011

 

 

 

 

   

P1102

 

 

 

 

   

P1103

 

 

 

 

   

P1104

 

 

 

 

 

 

P1105

 

 

 

 

 

Jump Bar:

  [Top of Page] | U-Die: [Copper] [Aluminum] [Specialty] | P-Die: [Copper] [Aluminum] [Specialty] | [Footnotes]

 

FOOTNOTES

Huskie Tools The following is excerpted from the HuskieTools.com website:

Huskie Dies are configured to be equivalent to Burndy dies of respective size. When using Huskie HT series dies consult the connector manufacturer for their recommended die cross referencing and application instructions. All Huskie dies are machined or cast from solid steel stock and case hardened to 45-50 HRC and are guaranteed for 10,000 operations. These dies are also marked with HT numbers and Burndy cross reference numbers to make cross referencing easy and less confusing. The following chart lists Huskie and equivalent Burndy numbers for reference only. Other manufacturer die numbers are also listed to aid the user in selecting the proper die cross reference numbers when using a particular connector. All connectors are different and the connector manufacturer should be consulted in each case. Many manufacturers offer different size connectors for the same wire size. Huskie Tools, Inc. is not responsible in the event of misuse or misapplication of die sets. Huskie Tools is not a connector manufacturer, but a tool and die supplier. FOR REFERENCE ONLY! CONSULT YOUR CONNECTOR MANUFACTURER FOR
EXACT CABLE, CONNECTOR AND DIE SELECTION.

Images of a crimp formed with circular or twin dies vs. a die-nest/indenter style crimp. As you can see, the crimp made with the indenter has significantly deformed the barrel of the lug. Indenter-type crimps are not allowed for most applications.

Crimper P-Die Cross Reference